Enphase 250W mICROINVERTER - M250-60-2LL-S22 |
Enphase, M250 Microinverter, 250W, 240/208VAC, 60Hz, 16-45VDC for 60 cell modules, MC Locking Connector in, 16" Engage Cable out, 25 Yr Warr, M250-60-2LL-S22 The Enphase M250 Microinverter delivers increased energy harvest and reduces design and installation complexity with its all-AC approach. With the M250, the DC circuit is isolated and insulated from ground, so no Ground Electrode Conductor (GEC) is required for the microinverter. This further simplifies installation, enhances safety, and saves on labor and materials costs. The Enphase M250 integrates seamlessly with the Engage® Cable, the Envoy Communications GatewayT, and Enlighten, Enphase’s monitoring and analysis software. |
Features
|
General Information | |
Manufacturer: | Enphase Energy |
Product Line: |
M250 |
Model ID: |
M250-60-2LL-S22 |
Certifications and Safety Ratings: | |
Mechanical Data |
|
Technology: | Micro-Inverter |
Dimensions: |
6.73 x 6.81 x 1.18 Inches |
Weight: | 4.40 lbs |
Enclosure Environmental Rating: | Outdoor - NEMA6 |
Cooling: | Natural Convection - No Fans |
Compatibility: | Compatible with 60-Cell PV Modules |
Communication: | Power Line |
Integrated Ground: | The DC circuit meets the requirements for ungrounded PV arrays in NEC 690.35. Equipment ground is provided in the Engage Cable. No additional GEC or ground is required. Ground fault protection (GFP) is integrated into the microinverter. |
Monitoring: | Free Lifetime Monitoring via Enlighten Software |
Compliance: | UL1741/IEEE1547, FCC Part 15 Class B, CAN/CSA-C22.2 NO. 0-M91, 0.4-04, and 107.1-01 |
Ambient Temperature Range: | -40 to +65°C |
Electrical Data |
|
Recommended Input Power (STC): | 210-300 Watts |
Maximum Input DC Voltage: | 48 Volts |
Peak Power Tracking Voltage: | 27-39 Volts |
Operating Range: | 16-48 Volts |
Min/Max Start Voltage: | 22 V / 48 Volts |
Max DC Short Circuit Current: | 15 Amps |
Max Input Current: | 10 Amps |
Peak Output Power: | 250W @208 VAC, 250W @240 VAC |
Rated (Continuous) Output Power: | 240W @208 VAC, 240W @240 VAC |
Nominal Output Current: | 1.15A @208 VAC, 1.00A @240 VAC |
Nominal Voltage/Range: | 208V / 183-229V @208 VAC, 240V / 211-264V @240 VAC |
Nominal Frequency/Range: | 60.0 / 57-61 Hz @208 VAC, 60.0 / 57-61 Hz @240 VAC |
Power Factor: | >0.95 @208 VAC, >0.95 @240 VAC |
Max Units per 20A Branch Circuit: | 25(Three Phase) @208 VAC, 17 (Single Phase) @240VAC |
Max Output Fault Current: | 850 mA rms for 6 cycles @208 VAC, 850 mA rms for 6 cycles @240 VAC |
CEC Weighted Efficiency: | 96.5% @208 VAC, 96.5% @240 VAC |
Peak Inverter Efficiency: | 96.5% |
Static MPPT Efficiency: | 99.4% |
Night Time Power Consumption: | 65 mW Max |
Datasheets |
|
Document | Type |
Enphase Energy M250-60-2LL-S22 Specs | Specifications |
Enphase Energy M250-60-2LL-S22 Installation | Installation Guide |
Warranty | 25 Year Limited Warranty |
Enphase Energy M250-60-2LL-S22 Warranty | Warranty |
Terms & Conditions |
|
Shipping: | Shipping Policy |
Returns: | Returns Policy |
Payments: | We accept: Visa, MasterCard, Discover, and American Express. We also accept checks, direct deposit and wire transfers for large orders. |
Warranty: 25 Year Limited Warranty