Blue Sky Energy MPPT Charge Controller - SB2512i-HV |
Blue Sky Energy, Solar Boost MPPT Charge Controller, 20A, 12V, SB2512i-HV Patented Maximum Power Point Tracking technology allows Solar Boost 2512i-HV and 2512iX-HV to increase charge current up to 30% or more compared to conventional charge controllers. The new higher input voltage capability of the HV version product now allows the use of higher voltage lower cost 60 cell PV modules to charge a 12 volt battery. Don't waste your money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller. The lower cost Solar Boost 2512i-HV provides an advanced fully automatic 3-stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less maintenance. A partial IPN network interfacei s also included to allow use of the Universal Communication Module (UCM), and IPN-Remote and IPN-ProRemote displays. |
Features
|
General Information | |
Manufacturer: | Blue Sky Energy |
Product Line: |
Solar Boost |
Model ID: |
SB1524i-HV |
Certifications and Safety Ratings: | |
Mechanical Data |
|
Technology: | Maximum Power Point Tracking (PWM) |
Dimensions: |
6.00 x 6.00 x 3.00 inches |
Weight: | 2.00 lbs |
Output Current Limit: | 25 Amp Maximum 36 Cell Modules; 20 Amp Maximum 60 Cell Modules |
Nominal Battery Voltage: | 12 VDC |
PV Input Voltage: | 50 VDC Absolute Maximum (Recommended Maximum Voc at STC < 40VDC) |
PV Input Power: | Recommended Maximum, 340W with 36 Cell Modules / 270W with 60 Cell Modules |
Power Consumption: | 0.30W Typical Standby, 1.0W Typical Charge On |
Charge Algorithm: | 3-Stage Bulk/Absorption/Float, Charge Time in Absorption Fixed at 2 Hours (Range 0-100 Hours) |
Absorption/Float Voltage: | 14.2 VDC / 13.2 VDC Fixed Value (10.0 - 20.0 VDC) |
Power Conversion Efficiency: | 96% Typical @ 14 Volt 20 Amp Output with 36 Cell Modules |
Physical Configuration: | Open Frame Construction with Conformal Coated Electronics Mounted to Rear of 5.3"x5.3" Clear Anodized Aluminum Face Plate. Black ABS Corrosion Proof Mounting Box Included, 2.5" |
Analog Input Accuracy/Range |
Battery / PV Voltmeters, 35.0 VDC / 55.0 VDC ±0.50% FS; Input/Output Ammeters, 30.0 Amps ±0.50% FS |
Communication: | 2 Amp Typical, Same Charge Voltage as Primary Battery |
Load Control: | IPN Network Connector for IPN Displays & UCM Only. Complete IPN Interface for Multi-Controller Coordination Not Provided. |
Environmental: | -40°C to +40°C, 10-90% RH Non-Condensing |
Datasheets |
|
Document | Type |
Blue Sky Energy SB2512i-HV Specs | Specifications |
Blue Sky Energy SB2512i-HV Manual | User's Manual |
Blue Sky Energy SB2512i-HV Brochure | Brochure |
Warranty | 5 Year Parts and Labor Limited Warranty |
Blue Sky Energy SB2512i-HV Warranty |
Warranty |
Terms & Conditions |
|
Shipping: | Shipping Policy |
Returns: | Returns Policy |
Payments: | We accept: Visa, MasterCard, Discover, and American Express. We also accept checks, direct deposit and wire transfers for large orders. |
Warranty: 5 Year Parts and Labor Limited Warranty