Enphase 235W-350W+ Microinverter - IQ7-60-2-US |
Enphase, IQ 7 Micro Inverter, compatible with 60-cell PV modules (only), 208/240 volt, 250VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7-60-2-US The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro achieve the highest system efficiency. Part of the Enphase IQ System, the IQ 7 and IQ 7+ Micro integrate seamlessly with the Enphase Envoy-S, and the Enphase Enlighten monitoring The IQ 7 and IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty. |
Features
|
General Information | |
Manufacturer: | Enphase Energy |
Product Line: |
IQ7 Series |
Model ID: |
IQ7-60-2-US |
Certifications and Safety Ratings: | |
Mechanical Data |
|
Technology: | Micro-Inverter |
Dimensions: |
8.34 x 6.89 x 1.19 Inches |
Weight: | 2.38 lbs |
Connector Type: | MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter) |
Cooling: | Natural convection - No Fans |
Approved for Wet Locations: | Yes |
Pollution Degree: | PD3 |
Enclosure: | Class II Double-Insulated |
Environmental Category / UV Exposure Rating: | Outdoor - IP67 |
Communication: | Power Line Communication (PLC) |
Monitoring: | Enlighten Manager and MyEnlighten Monitoring Options. Compatible with Enphase IQ Envoy |
Compliance (Pending): | AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62019-1, IEC/EN 62109-2 |
Ambient Temperature Range: | -40°C to +65°C |
Relative Humidity Range: | 4% to 100% (Condensing) |
Electrical Data |
|
Input Data | |
Commonly Used Module Pairings: | 235W to 350W+ |
Module Compatibility: | 60-Cell PV Modules |
Maximum Input DC Voltage: | 48 Volts |
Peak Power Tracking Voltage: | 27V-37 Volts |
Operating Range: | 16V-48 Volts |
Min / Max Start Voltage: | 22 V / 48 Volts |
Max DC Short Circuit Current (Module Isc): | 15 Amps |
Overvoltage Class DC Port: | II |
DC Port Backfeed Under Single Fault: | 0 Amps |
PV Array Configuration: | AC Side Protection Requires Max 20A per Branch Circuit |
Output Data (AC) | |
Peak Output Power: | 250 VA |
Maximum Continuous Output Power: | 240 VA |
Nominal Voltage / Range: | 240V / 211-264, 208V / 183-229 |
Nominal Output Current: | 1.04 Amps |
Nominal Frequency: | 60 Hz |
Extended Frequency Range: | 49-68 Hz |
Maximum Units per 20 A (L-N) Branch Circuit: | 16 |
Overvoltage Class AC Port: | III |
AC Port Backfeed Current: | 18 Amps |
Power Factor Setting: | 1.0 |
Power Factor (Adjustable): | 0.7 Leading ... 0.7 Lagging |
Efficiency: | 97% |
Datasheets |
|
Document | Type |
Enphase Energy IQ7-60-2-US Specs | Specifications |
Enphase Energy IQ7-60-2-US Installation | Installation Guide |
Warranty | 25 Year Limited Warranty |
Enphase Energy Warranty | Warranty |
Terms & Conditions |
|
Shipping: | Shipping Policy |
Returns: | Returns Policy |
Payments: | We accept: Visa, MasterCard, Discover, and American Express. We also accept checks, direct deposit and wire transfers for large orders. |
Warranty: 25 Year Limited Warranty