Enphase 320w-460W+ Microinverter - IQ7X-96-2-US |
Enphase, IQ 7X Micro Inverter, compatible with 96-cell PV modules, 208/240 volt, 320VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7X-96-2-US The high-powered smart grid-ready Enphase IQ 7X Micro dramatically simplifies the installation process while achieving the highest system efficiency for systems with 96-cell modules. Part of the Enphase IQ System, the IQ 7X Micro integrates with the Enphase IQ Envoy, Enphase IQ Battery, and the Enphase Enlighten monitoring and analysis software. The IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years. |
Features
|
General Information | |
Manufacturer: | Enphase Energy |
Product Line: |
IQ7 Series |
Model ID: |
IQ7X-96-2-US |
Certifications and Safety Ratings: | |
Mechanical Data |
|
Technology: | Micro-Inverter |
Dimensions: |
8.35 x 6.89 x 1.19 Inches |
Weight: | 2.38 lbs |
Connector Type: | MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter) |
Cooling: | Natural convection - No Fans |
Approved for Wet Locations: | Yes |
Pollution Degree: | PD3 |
Enclosure: | Class II Double-Insulated, Corrosion Resistant Polymeric Enclosure |
Environmental Category / UV Exposure Rating: | NEMA Type 6 / Outdoor |
Communication: | Power Line Communication (PLC) |
Monitoring: | Enlighten Manager and MyEnlighten Monitoring Options. Compatible with Enphase IQ Envoy |
Disconnecting Means: | The AC and DC Connectors Have Been Evaluated and Approved by UL for Use as the Load-Break Disconnect Required by NEC 690 |
Ambient Temperature Range: | -40°C to +65°C |
Relative Humidity Range: | 4% to 100% (Condensing) |
Electrical Data |
|
Input Data | |
Commonly Used Module Pairings: | 320W to 460W+ |
Module Compatibility: | 96-Cell PV Modules |
Maximum Input DC Voltage: | 80 Volts |
Peak Power Tracking Voltage: | 53V-64 Volts |
Operating Range: | 25V-80 Volts |
Min / Max Start Voltage: | 30V / 80 Volts |
Max DC Short Circuit Current (Module Isc): | 10 Amps |
Overvoltage Class DC Port: | II |
DC Port Backfeed Under Single Fault: | 0 Amps |
PV Array Configuration: | 1 x 1 Undergrounded Array; No Additional DC Side Protection Required; AC Side Protection Requires Max 20A per Branch Circuit |
Output Data (AC) | |
Peak Output Power: | 320 VA |
Maximum Continuous Output Power: | 315 VA |
Nominal Voltage / Range: | 240V / 211-264V |
Nominal Output Current: | 1.31 Amps |
Nominal Frequency: | 60 Hz |
Extended Frequency Range: | 47-68 Hz |
Maximum Units per 20 A (L-N) Branch Circuit: | 12 (240 VAC) |
Overvoltage Class AC Port: | III |
AC Port Backfeed Current: | 0 Amps |
Power Factor Setting: | 1.0 |
Power Factor (Adjustable): | 0.7 Leading ... 0.7 Lagging |
Efficiency: | 97.5% |
Datasheets |
|
Document | Type |
Enphase Energy IQ7X-96-2-US Specs | Specifications |
Enphase Energy Installation | Installation Guide |
Warranty | 25 Year Limited Warranty |
Enphase Energy Warranty | Warranty |
Terms & Conditions |
|
Shipping: | Shipping Policy |
Returns: | Returns Policy |
Payments: | We accept: Visa, MasterCard, Discover, and American Express. We also accept checks, direct deposit and wire transfers for large orders. |
Warranty: 25 Year Limited Warranty