MidNite Solar MNE250XWP-Single E-Panel

Midnite Solar, E-Panel, 250A, 125VDC, White Steel for Schneider Conext XW+ inverter, MNE250XWP-Single

E-Panel for a single Schneider Electric XW Plus inverter/charger. The XW Plus inverter is mounted directly above the E-Panel for a 16 in wide assembly.

The MNE250XWP-SINGLE or MNE175XWP-SINGLE is mounted directly below the XW+ inverter. It includes a 250 A, or 175 A inverter/battery breaker, AC inputs for generator and utility, knockouts for up to seven DIN-mount breakers and 12 panel-mount breakers, and a 500 A shunt. Tin-plated copper busbars connect to the XW’s battery terminals. There are busbars for AC inputs, AC output, neutral, ground, PV + in, PV - in, Bat +, and Bat - covered by a metal dead-front behind the reversible door. Charge controllers mount to either or both sides. The AC bypass can be configured as input and output on/off as well as AC bypass. The XW MPPT controller requires no mounting bracket. FM60, FM80, and Classic controllers require right or left E-Panel charge controller mounting brackets. A right-hand bracket is included. The color-matched enclosure is 16"W x 17"H x 8.5"D, and weighs 38 lbs.

The MNE250XWP-MASTER and MNE250XWP-SLAVE, and the 175 A versions, can be used for a dual-inverter setup. The master E-panel has a 120 A AC bypass assembly and all of the other items listed for the single E-panel. The master E-panel is mounted under one XW+ inverter and the slave E-panel is mounted under the second inverter. They can then be wired together. The slave E-panel has 60A AC input breakers for utility and generator and knockouts for up to seven DIN-mount breakers and 12 panel-mount breakers, and a 500 A shunt, as well as the bus bars for DC and AC connections. The color-matched enclosure is 16"W x 17"H x 8.5"D, and weighs 38 lbs.

Features

• Highlights - Inverter battery breaker. 2 separate 60 amp AC inputs for generator and utility. 60 amp AC bypass switch. Knockouts for up to seven din rail mount DC DCGFP63 or AC breakers and 12 panel mount or DC-GFP80 breakers. Massive tin plated copper bus bars directly connect to the XW’s battery terminals. Bus bars for AC inputs. AC output neutral, ground, PV + in, PV- in, Bat +, Bat-. 500 amp shunt (MNSHUNT). Metal dead front behind the reversible door. Charge controllers mount to either side or both sides at once for dual controllers. AC bypass can be configured as input & output on/off as well as AC bypass. (Note: The XW 60 amp controller can mount on the Right side only due to their isolated communications compartment). The XW MPPT controller requires no mounting bracket. FM60, FM80 and Classic require Right or Left E-Panel charge control mounting brackets. Right hand bracket furnished standard. Main Breaker Current Rating - 250. Number of spaces - 19. Environmental Rating - Type 1 (Indoor). Max. Wire Size - 4/0 AWG. Max. AC Voltage - 240VAC. Max. DC Voltage - 300VDC. Warranty - 5 yrs. Listed by ETL for US & Canada. Made in the USA.