SolaDeck 0799-5G Roof-Mount Enclosure

SolaDeck, NEMA 3R Enclosure, Gray, 5 Position Ground, 0799-5G

The new SolaDeck 0799 enclosures are NEMA 3R and listed to the UL 1741 standard. All SolaDeck models are seamless with a roofing industry approved flashing. SolaDeck parts are all made from 18- gauge galvanized steel with a powder-coated finish (Gray or Black) providing a professional look. The 0799 Soladeck Enclosure is also available in Stainless steel. The overall depth of the enclosure is 3”. Every enclosure has an 8” long 35mm din rail installed for fuse holders, breakers or terminal blocks and include a 5-position ground bar.

SolaDeck model 0766-41D is 6” deep for use on deep tile and concrete tile roof systems This model comes with a 30” square dead soft aluminum flashing and can be used with AC or DC combiner or pass through kits.

All SolaDeck enclosures can be used for combiner or pass through applications for both DC or AC systems. SolaDeck parts are now rated up to 1000 VDC at 180 amps, and up to 480 VAC at 60 amps.

Combiner and pass through kits are available and include the necessary components to either combine strings, circuits or to transition PV wire to THHN wire and pass-through. To make pass-through connections inside a SolaDeck, use one of PASS-THRU kits. These kits include din rail mount terminal blocks that can be used with 16 to 6 AWG wire and hardware to hold them in place. Each terminal is 8mm wide. Kits also include gland fittings, end plates and rail stops. See the next page for SolaDeck combiner and pass-through kits. You can also use fuse holder kits to pass through or combine strings.

Features

• Highlights - There are 5 knockouts inside the enclosure (3) - 1/2”, (1) - 3/4” and (1) - 1” for cable or conduit to penetrate the roof deck. The SolaDeck base has dimple locations to enter the enclosure above the roof deck with conduit or gland fittings. These dimple locations can be punched or drilled out. Corner dimples will accept up to 1” fittings or conduit, the 3 center dimples will accept up to ¾” fittings or conduit.